Battery and Starter Automotive Cable

The Red2go range of premium Elcon battery and starter automotive cables delivers heavy-duty, high-current power distribution for commercial transport, 4WD dual-battery conversions, and heavy industrial machinery. Engineered to handle intense cranking loads and minimise voltage drop over extended cable runs, these high-flexibility power cables ensure maximum electrical efficiency. Sourced from Elcon Australia, the heavy-gauge wiring range is purpose-built to withstand the punishing mechanical vibrations, chemical exposure, and high thermal demands of modern engine bays.

red and black battery and starter cables 99.9% oxygen free copper UV stabilised V90HT to AS3808 rated to 50VAC and 120VDC Cable applications for dual batteries and power inverters

red2go home pagesingle core automotive cablesbattery and starter automotive cablestwin sheath automotive cablestrailer cablesview all trailer cables




Core Engineering Features & Performance Advantages

AS/NZS 1125 High-Purity Annealed Copper
At the core of every Elcon battery and starter cable are premium plain annealed copper strands manufactured to comply strictly with AS/NZS 1125 electrical constraints. This high-purity, oxygen-free copper architecture ensures the lowest possible electrical resistance, facilitating instant high-amperage current transfer during engine ignition loops. The advanced annealing process structuralises the copper to give it superb physical flexibility, allowing heavy-gauge cables to be cleanly routed through dense engine compartments and chassis channels without work-hardening or cracking.

V90HT Thermal Insulation & UV Protection
To combat volatile under-bonnet ambient heat and harsh environmental factors, the heavy-duty conductor arrays are encased in specialized V90HT grade PVC insulation compliant with AS3808:2000. This compound retains its physical shape, density, and structural integrity in sustained operating temperatures peaking at +90 degrees Celsius. Available in bold red or black jackets for immediate polarity identification, the insulation is completely UV-stabilised to prevent chemical breakdown, brittleness, and cracking when exposed to direct sunlight in open utility vehicle trays or other harsh environments.

Maximum Protection Against Voltage Drop
Running heavy-duty auxiliary gear like power inverters, secondary lithium battery banks, or high-draw recovery equipment requires high voltage stability. If the supply wire is undersized, electrical resistance causes a sharp drop in voltage over long distances, which can trigger low-voltage alarms or cause expensive equipment to fail. Elcon battery and starter cables provide thick, multi-stranded copper pathways that keep resistance low, protecting your electronics and ensuring efficient cranking speeds.

Frequently Asked Questions

Why is using a dedicated B&S battery cable better than standard automotive wire for dual batteries?
Standard automotive accessory wire is designed for light loads like lights and switches. Connecting a secondary battery bank or a DC-DC charger requires a wire that can handle continuous heavy charging currents without overheating. Elcon B&S cables offer significantly larger cross-sectional copper areas, ensuring they can carry high currents safely while maintaining efficient voltage levels over long chassis runs.

What is the advantage of using high-purity annealed copper in starter systems?
The high-purity plain annealed copper strands used in Elcon cables provide optimal conductivity and high flexibility to survive heavy hull vibrations. When paired with correct sealed lugs and heat-shrink terminations, these cables prevent corrosion from creeping up the wire strands, securing your main starter circuit.