GL Heat Shrink End Caps 9.5-2mm x 22mm 100Pk


In Stock


Free Delivery Australia wide for all orders - Minimum invoice value $50

Product: 9.5mm ID to 2.0mm ID x 32mm Length
Heat Shrink – RENF Low Cost Semi-ridgid Adhesive Lined End Caps

Provides sealing and protection of cable ends for power cables to 1kV and irrigation / reticulation cables.


  • Resistance to chemical, fuel oil, insulation oil, copper corrosion and fungus
  • Hot melt adhesive for effective water and environmental sealing
  • High tensile strength
  • UV stabilised
RENF Heat Shrink End Cap Circular Dimensions
Part Number
As Supplied After Recovery
Inside Ø Inside Ø Wall
RENF3-1 3.2mm ≤ 0.80mm 1.20mm
RENF5-2 4.8mm ≤ 1.30mm 1.52mm
RENF6-2 6.4mm ≤ 1.52mm 1.91mm
RENF9-2 9.5mm ≤ 2.00mm 2.08mm
RENF12-3 12.7mm ≤ 2.41mm 2.54mm



RENF End Caps Testing Method Requirement
 Physical  Tensile Strength ASTM D 2671 10.4MPa
Elongation % ASTM D 2671 ≥300
Tensile Strength
After Aging MPa
158°C x 168hrs
Elongation %
After Aging
158°C x 168hrs
Electrical Dielectric Strength kV/mm IEC 243 15
Volume Resistance Ohm/cm  ASTM-D-876 2.5x1014
Adhesive Water Absorption ASTM D 570 <0.2%
Softening Point ASTM DE 28 90°C +/-5%
Strength of Pearing (PE) ASTM D 1000 120N/25mm
Strength of Pearing ASTM D 1000 80N/25mm


Brand Radiform

Be The First To Review This Product!

Help other Red2go Pty Ltd users shop smarter by writing reviews for products you have purchased.

Write a product review

Others Also Bought

More From This Category