Nitto Self fusing Tape .5mm x 19mm x 10m


In Stock
Buy In Packed Quantities and Save!
Buy 10 or more: Pay $11.67


Free Delivery Australia wide for all orders - Minimum invoice value $50

Nitto Butyl Rubber Self fusing Tape .5mmx19mmx10m

Product Description
Nitto 15 is a self-fusing, butyl rubber tape, widely used for the electrical insulation, protection, sealing, splicing and termination of 6 to 22 kV cables. Nitto has eliminated the conventional need for a liner thereby reducing the time required to apply the tape.

Nitto 15 has an excellent volume resistivity, a high breakdown voltage and a low dissipation factor. It is totally resistant to moisture, water and chemicals.Nitto 15 offers excellent electrical insulation, workability and weather protection. The product has a superior weatherability and ozone resistance and because of the linerless system a very short application time. It completely self-amalgamates in two hours. 

Nitto 15 can be used for termination, splicing and corrosion protection of cables. Also insulation and protection of lead shielded cables is possible. The product is used for its waterproof sealing and corrosion protection of cables in marine and off-shore environments.

Property Unit
Application Temperature -10°C to +40°C
Operating Temperature Range -40°C to +65°C
Maximum Operating Temperature +100°C Short Period
Self-amalgamating Property Nitto Tested
Elongation 180% 5min Holding Not Amalgamated
Elongation 180% 60min 70% Amalgamated
Elongation 180% 24hrs 100% Amalgamated



Property Test Method Unit
Material   Butyl Rubber
Thickness ASTM-D-1000 0.5mm
Tensile Strength +23°C ASTM D 1373 3.2N/mm²
Tensile Strength +100°C 96hrs ASTM D 1373 3.0N/mm²
100% Modulus +23°C ASTM D 1373 1.3N/mm²
100% Modulus +100°C 96 hrs ASTM D 1373 1.3N/mm²
Elongation +23°C ASTM-D-1373 550%
Elongation +100°C 96hrs ASTM D 1373 570%
Brittle Point   -60°C
Breakdown Voltage   44kV/mm
Dielectric Dissipation Factor   0.04%
Dielectric Constant ASTM-D-150 2.6
Power Factor 60Hz ASTM-D-1373 0.05-0.08%
Ozone Resistance ASTM-D-470 0.02% 24hrs
Crack Test - Pass Nitto +80°C 30min



SKU No.15
Brand Nitto Denko

Be The First To Review This Product!

Help other Red2go Pty Ltd users shop smarter by writing reviews for products you have purchased.

Write a product review

Others Also Bought

More From This Category